Industry – milling motor

Fräsmotor Suhner

Industry Milling Motor SUHNER

UAD 30-RF, 1050 Watt, 1,4 HP, 3.500-30.000 U/min


298,00 €

(inkl. 19% German VAT)



Industry milling motor and grinding motor SUHNER UAD 30-RF with 1.4 HP

CNC-STEP exclusive: Top RPM range from 3.500-30.000 RPM

Introductory offer for new customers purchasing CNC-STEP CNC Machines :

New customers can take advantage of our special introductory offer for the SUHNER UAD 30-RF industry milling motor:

235€ incl. 8mm and 10mm high quality collet (RRP 24,90€) – Saving almost 90,00€.

There are no overheating problems and delay problems with this stable milling motor, due to large-sized double ball bearings in a stable, thick-walled steel motor flange and the generously dimensioned fan.

A clean and vibration-free cutting result is no problem, thanks to the high quality double bearing in the steel motor flange.

The exclusively available SUHNER milling motor from CNC-STEP  is ideal for working with Plexiglas, plastic, PVC, wood, metals, it is also extremely quiet (at 9000 rev / min only 72dB) and can be used in hobby rooms or the commercial sector for milling, engraving or grinding without

Product specifications industry milling motor SUHNER UAD 30-RF:

  • Powerful industry milling motor with 1050 watts and 740 watts output power
  • High torque of 0,32 Nm for operations in e.g. hard wood, steel or brass
  • Tachometer regulator electronics for constant performance and rotation speed of the milling motor on load cycles
  • Soft start and starting current limiter
  • PTC thermal monitoring
  • Very high torque even at 3500 RPM.
  • Hard-faced motor winding for dust and particle protection
  • Steel motor flange with double bearing for high milling forces
  • Electronic overload protection prevents overheating of the milling motor
  • Shutoff carbon brushes for motor protection
  • Suitable to drive flexible shafts
  • FastChange: carbon exchange in 5 minutes, thanks the sophisticated motor construction and housing

Technical data:

  • Power input 1050 watts / rated current at 5,0 A with high output power of 740 watts
  • Idle speed from 3.500 to 30.000 RPM.
  • Collet 8 mm
  • Open-end wrench set SW18 and SW22 mm
  • Collar-Ø 43 mm
  • Maximum tool diameter: 40mm
  • Maximum collet diameter: 10mm
  • Weight: 2,85 kg
  • Super silent, only 72 dB at 9.000 RPM

Included in delivery:

  • Precision Collet 8 mm
  • Industry Milling Motor SUHNER UAD 30-RF
  • Open-end wrench SW18 and SW22