High-Z CNC Router and Engraver – T-Series with high quality ball screws

This CNC Router Machine will sprint within seconds from 0 – 12.000 mm / Minute!

from 3.267,00 €

(incl. 19% German VAT)

High-Z T-Series CNC Router

The CNC Router High-Z of the T series is always a good choice, no matter if you are looking for an industrial machine, which is taking 8-hour-shifts or if you need a CNC machine for any private purposes.

This CNC Machine will sprint with her high performance ball screws within seconds from 0 – 12.000 mm/min.!

With the T-model of the High-Z you obtain well-tried High-Z techniques, which is “the icing on the cake”. The High-Z/T has been conceived in order to guarantee more accuracy (repeat accuracy approx. 0,01 mm) and a higher proceeding speed for bulk production, when every second of time saving counts with regards to the individual production.

– Our machines of the high-z t-series are certified by the German TÜV –



CNC Router versions

cnc router machine
CNC Fräsmaschine High-Z S-1400 T
CNC Fäse High-Z S-1000/T Vorderseite
CNC Fräse High-Z S-720/T Vorderseite

Features High-Z T-Series

  • Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
  • 2 motors for constant tension and compression during milling operation on X-Axis
  • Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
  • Ball bearings at both sides of ball screws on X and Y axis
  • Working speed around 8000 mm/min max.
  • Traverse speed of rapid feed: max. 12.000 mm/min
  • Technical resolution : 0,00635 mm ( 1/10 Step )
  • Reversal error max.: +/- 10µm ( 0,01mm )
  • Reference- and limit switch on all axes
  • Double safety emergency stop button
  • Energy chain for clean cabling
  • Milling Motor anchorage: Euroneck Ø43mm
  • incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional)
  • incl. Software ConstruCAM-3D limited ( recommended sell price full version 1902.81 EUR)
    To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward
  • Modular frame for universal application
  • An approx. 30-minute long introduction during pick up and an unlimted telephone support via Team Viewer Software are also included.
  • An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.

Digital control

Technical data contained in the price TÜV-certified digital control system, tailored to the CNC engraving machine / CNC milling machine:cnc router machine controller

  • 5-Channel Stepper motor -CNC-Controller with actual SMD-Technology
  • Main voltage 115 – 240 Volt / 47 – 63 Hz.
  • Motor current 5 x 3,5 Ampere
  • Microstep controller Resolution 1/10-Step / 2000 Steps/Rev.
  • 5 Connections for 5 brushless Motor / Stepper motor
  • Connection with parallel port and Software WIN PCNC Light, Economy or USB with WIN PCNC USB or Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much other stepper driver software.)
  • “Sleep-Function” for controlling current down
  • Oszillation motor-Connection 24 Volt by PWM controllable ( for example: Tangential knife ) or  24 Volt constant for motor Break by ST-plug
  • 2 relais for maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230 Volt, max. 6,0 A / Plug (for example Air compressor, cooling, exhaust, dust extraction).
  • 0 – 10 Volt for connecting a HF converter for an high frequency spindle
  • 12 Status-LEDs for monitoring all important function (Power, Toggle, Move, X, Y, Z, C; Overheat, Emergency stop, Relais: Spindle / Cooling, Short Circuit)
  • Connection possibility of 4 end- or. Reference switches and one Emergency Stop switch
  • Motor connection by D-Sub 9-pin. (C-Axis: 15-pin.)
  • Emergency-Stop Switch
  • Overheating protection
  • Short circuit protection

Functions, accessory and prices

Technical data High-Z CNC Router /
Engraver with ball screws / spindles
S400 TS720 TS1000 TS1400 TS1400 T/105
Article Number100110100120100130100140100160
X Axis Travel400 mm720 mm1000 mm1400 mm1400 mm
Y Axis Travel300 mm420 mm600 mm800 mm1050 mm
Z Axis Travel110 mm110 mm110 mm110 mm110 mm
Clearance Z (Upper edge machine frameunder
edge bridge)
107 mm107 mm107 mm109 mm109 mm
Clamping Area X730 mm1050 mm1330 mm1730 mm1730 mm
Clamping Area Y390 mm510 mm690 mm890 mm1170 mm
Weight31 kg41 kg51 kg82 kg80 kg
Length over all X730 mm1050 mm1330 mm1730 mm1730 mm
Width over all Y570 mm690 mm870 mm1070 mm1350 mm
Height over all Z575 mm575 mm575 mm575 mm575 mm
Linear Guides Diameter X/Y Ø22/22 mm22/22 mm22/22 mm22/30 mm22/30 mm
Linear Guides Diameter Z Ø16 mm16 mm16 mm16 mm16 mm
Add. Ball Linear Guides X-Axis / HIWIN– / optional
Steps per Revolution 1/10 Micro-Step20002000200020002000
Ø Ball Screws / Spindles DiameterX/Y/Z10/10 mm10/10 mm10/10 mm12,7/12,7 mm12,7/12,7 mm
Slope10 mm10 mm10 mm12,7 mm12,7 mm
Programmable Resolution0,005 mm0,005 mm0,005 mm0,00635 mm0,00635 mm
Backlash+/- 0,015 mm+/- 0,015 mm+/- 0,015 mm+/- 0,015 mm+/- 0,015 mm
Repeatable Accuracy0,01 mm0,01 mm0,01 mm0,01 mm0,01 mm
Max. Rapid Speed X + Y12000 mm/min12000 mm/min12000 mm/min12000 mm/min12000 mm/min
Max. Cutting Speed8000 mm/min8000 mm/min8000 mm/min8000 mm/min8000 mm/min
Digital CNC Controller Zero3 / 5-Channe
Operating System with Software
Windows / Linux
incl. Full Version 3D-Software CADCAM
ConstruCam-3D with
Postprocessor for Win PCNC and MACH3
Price in EUR (incl. 19 % German VAT)3.267,003.823,004.373,007.767,008.095,00
Operating instructions
Quick-start guide for High-Z Series CNC routersDEEN
High-Z T-Series operating manualDEEN
High-Z S 1400-T operating manualDEEN