High-Z Engraving Machine – Standard with trapezium spindle


The original High-Z of CNC-STEP

CNC Router and CNC Engraver with trapezium spindles

from 2.287,00 €

(incl. 19% German VAT)

High-Z CNC Engraving Machine – Standard with trapezium screws

The original High-Z of CNC-STEP

With worldwide more than 6600 sold CNC Engraving Machines (according to figures in 09/2014) since January 2005 this CNC Machine should be the most successful and popular portal CNC milling machine in that price segment in Europe!

With the High-Z CNC Router you purchase an allround talent in TÜV-certified quality.

If you want to clamp and fix complex workpieces on the worksurface, or, clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).

Or if you simply want to do engraving- or drilling jobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth.

All  xyz tables are being delivered with black energy-chains on all axis, which allows a better cabling management.

Also all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller.

Applications

Video

High-Z Standard versions

Features

  • Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
  • 2 motors for constant tension and compression during milling operation on X-Axis
  • Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
  • Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
  • Ball bearings at both sides of ball screws on X and Y axis
  • Working speed around 3000 mm/min max.
  • Traverse speed of rapid feed: max. 4.000 mm/min
  • Technical resolution : 0,003 mm ( 1/10 Step )
  • Reversal error max.: +/- 30µm ( 0,03mm )
  • Reference- and limit switch on all axes
  • Double safety emergency stop button
  • Energy chain for clean cabling
  • Milling Motor anchorage: Euroneck Ø43mm
  • incl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or professional)
  • complete machine includes 4 driver micro step controller, 4 x 3,5 Amps
  • modular frame for universal application
  • An approx. 30-minute long introduction during pick up and an unlimited telephone support via Team Viewer Software are also includet.
  • An approx. 2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.

Functions, accessory and prices

Techncal data High-Z CNC Router / Engraver with trapezium
spindles
S400S720S1000
Article number100010100020100030
X-axis Travel400 mm720 mm1000 mm
Y-axis Travel300 mm420 mm600 mm
Z-axis Travel110 mm110 mm110 mm
Clearance Z (Upper edge machine frame-under edge bridge)107 mm107 mm107 mm
Clamping Area X730 mm1050 mm1330 mm
Clamping Area Y390 mm510 mm690 mm
Weight31 kg41 kg51 kg
Length over all X730 mm1050 mm1330 mm
Width over all Y570 mm690 mm870 mm
Height over all Z575 mm575 mm575 mm
Linear guides diameter X/Y Ø22/22 mm22/22 mm22/22 mm
Linear guides diameter Z Ø16 mm16 mm16 mm
Add. Ball Linear Guides X-Axis / HIWIN– / optional
Steps per Revolution 1/10 Micro-Step200020002000
Ø Trapezium Spindles Diameter X/Y/Z12/12/12 mm12/12/12 mm12/12/12 mm
Slope6 mm6 mm6 mm
Programmable Resolution0,003 mm0,003 mm0,003 mm
Backlash+/- 0,03 mm+/- 0,03 mm+/- 0,03 mm
Repeatable accuracy0,01 mm0,01 mm0,01 mm
Max. Rapid Speed X + Y4000 mm/min4000 mm/min4000 mm/min
Max. Cutting Speed3000 mm/min3000 mm/min3000 mm/min
Digital CNC Controller Zero3 / 5-Channe
Operating System with Software
WINPC-NC, MACH3, EMC, Linux CNC: Windows / Linux
incl. Full Version 3D-Software CADCAM ConstruCam-3D with
Postprocessor for Win PCNC and MACH3
Price in EUR (incl. 19% German VAT)2.287,002.843,003.393,00
Operating instructions
Quick-start guide for High-Z RouterDEEN
High-Z Standard operating manualDEEN