Aluminium milling and machining

Circulary milling in solid aluminium with the High-Z CNC Router

Because of the free of backlash, special mechanic and spindle components adapted by our company it is also possible to round- mill in thick aluminium tight fitting ( H8 ) with the High-Z series!! Here’s the Video!

Video

General info

Workpiece:40H8 drilling
Material:Aluminium
Axis travel720x420x110
Application type:3D milling, circular milling
Used machines and accessoires:High-Z S720/T, Aluminium drillbit 3mm
Used software:ConstruCAM 3D

3D Milling a car / wheel in solid aluminium

Solid Aluminum milling work

All design for the following processing steps are developed with Corel Draw 7 . Let’s go!

Mill a spoked wheel with a diameter of 90mm and 15mm depth (thickness). To the demo we have unfortunately only in substantially thicker raw material for the order had.

On the left hand side you see the pictures of the work Completely pre-roughed. Completely pre-roughed to the comparison here also smoothed bearing sureface.

Milling work with double cutters

Milling work in aluminum/substantial treatment with double cutters

Mill clamped in aluminum in a heavy vice.
Rough-mill with burin. Areas 2mm deeply in a processing step with 500mm/min.

Milling example in a composite material: Aluminum shutters also out-foamed core

For these works there’s an appropriate router, too. In this case up- or downcut cutting edge geometry cutters with a polished clamp screws are mostly used.