This e-mail address is being protected from spambots. You need JavaScript enabled to view it
High-Z S-400
CNC Router and CNC Engraver with trapezium spindles
Our smallest High-Z machine for all 2D and 3D cnc jobs
Also available as speed version with up to 12.000 mm/Min !!
|
2.237,00 €
(including 19 % tax)
|
Specifications / Technical Data S-400 CNC Router / CNC Router Machine and CNC Engraver with high quality trapezium spindles
Description:
With the High-Z CNC Router you purchase an allround talent.
If you want to clamp and fix complex workpieces on the worksurface, or, clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).
Or if you simply want to do engraving- or drilling jobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth.
All cnc machines are being delivered with black energy-chains on all axis, which allows a better cabling management.
Also all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller.
Basic equipment of all High-Z CNC milling machines:
Software ConstruCAM-3D limited ( up from S-720 and S-400/T ) included ( not S-400 ) !!
Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!
Equipment / Product details CNC Router S-400:
- Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
- 2 motors for constant tension and compression during milling operation on X-Axis
- Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
- Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
- Ball bearings at both sides of ball screws on X and Y axis
- Working speed around 3000 mm/min max.
- Traverse speed of rapid feed: max. 4.000 mm/min
- Technical resolution : 0,003 mm ( 1/10 Step )
- Reversal error max.: +/- 30µm ( 0,03mm )
- Table size / clamping area: 730 x 390 mm
- Traverse Paths: X=400 mm; Y=300 mm; Z= 110 mm
- Reference- and limit switch on all axes
- Double safety emergency stop button
- Energy chain for clean cabling
- Total dinemsions incl motors: L x W x H = appr. 730 x 570 x 575mm
- Milling Motor anchorage: Euroneck Ø43mm
- incl. Software PC-NC or WIN PCNC Light
- complete machine includes 4 driver micro step controller, 4x 3,5 Amps
- modular frame for universal application
- Weight appr. 32 kg
- An approx. 30-minute long introduction during pick up and an unlimted telephone support via Team Viewer Software are also includet.
- An approx. 1 1/2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.
Technical data of includet microstep controller:
- 4-channel control Power up to 4 x 3,5 AmpsMicro pacing 1/10- Micro-Step / 2000 steps / rev.
- 4 ports for 4 stepper motors
- Connection to parallel port or in USB WIN PCNC Economy to USB port
- "Sleep function" for power reduction in standby
- Protect against high voltage spikes
- LED control light for most important functions
- E-stop button, 2-way secured
- Control of 2 power-consumers up to 1200 watts via software switchable (from WIN PCNC Economy), 230 V, 8A ( 110 Volt controller also available )
- Power Supply Relay / Cooling
- Aluminum heatsink / 2 active fans 60 & 40mm
- Ability to connect a total of 5 end-and reference switches / stop button
- Connection ports of motors and control line through D-sub 9-pin.
More information, several videos about the applicability of the machine and customer implementations can be found here.
Use this cnc router as an plasma cutter ! Info here
The name High-Z derives from the fact, that the machines lower construction allows to work on pieces with unlimited height.
Take advantage of the High-Z 3D cnc-router as a plasma cutting machine for plasma cutting of steel, etc. Infos here !!!
Software Process:
You simply need to draw, control the tool path and finally move the machine with the generated G-codes.
Usable software:
-ConstruCAM-3D - WIN PCNC- Mach2/Mach 3 -
-DeskProto - FilouNC - WIN PCNC- and much other variants
Pictures of High-Z CNC milling machine / portal mill for download:
