This e-mail address is being protected from spambots. You need JavaScript enabled to view it
High-Z S-1400/T
CNC Router
Wood Router / CNC Router Machine
Our biggest High-Z machine for all 2D and 3D cnc jobs
The speed version with up to 12.000 mm/Min
|
8.605,00 €
(including 19 % tax)
|
Specifications / Technical Data S-1400/T CNC Router / CNC Routers and engraving machines
Special offer for short time:
Complete machine with Included 4 driver microstep controller 4x 3,5 Ampere, T-Groove plate and Kress milling motor 1050 Watt incl. 8mm collet
Attention: Pictures are showing the type with trapezium spindles, thats the only difference to the t-series . Shown stand is an option !
Description:
With the purchase of the T-variation of High-Z CNC engraver and cnc router you get a proven technology with a certain icing of the cake. High-Z/T was conceived for once more precision (repetition precision approx. 0,02 mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T CNC machine achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm.
At the same time there are high traverse speeds up to approx. max. 200 mm / sec. ( 12.000 mm/min ) possible.
With this cnc unit you’re able to carry out an engrave and mill speeds of approx. 8.000 mm/min. and express travels up to 12.000 mm/min.
Here's a video on a unloaded drive with the new High-Z / T with our old 2,4 Amps controller ( this time you will get the brand new 3,5 Amps controller with many new features) !
This XYZ cnc table series is usable in the industrial field as well as for works like engraving, milling, drilling, measuring, cutting and measuring out systems as for example adhering of adhesive on 3D outlines.
All cnc routers are being delivered with black energy-chains on all axis, which allows a better cabling management.
All machines also equipped with an emergency stop button. An additional emergency stop you find in front of the controller.
Basic equipment of all High-Z CNC milling machines:
Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !!
Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!
Equipment / Product details CNC Router S-1400/T:
- Drive : 4 brushless stepping motor by Nanotec with 4,2 Amps each
- 2 motors for constant tension and compression during milling operation on X-Axis
- Guide ways X 30mm diam. and Y axle 22 mm diam./ Z Axis 16mm, grinded and with 61hrc hardened surface
- Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
- Ball bearings at both sides of ball screws on X and Y axis
- Working speed around 8000 mm/min max.
- Traverse speed of rapid feed: max. 12.000 mm/min
- Technical resolution: 0,00635 mm ( 1/10 Step )
- Reversal error max.: +/- 10µm ( 0,01mm )
- Table size / clamping area: 1730 x 880 mm
- Traverse Paths: X=1400 mm; Y=800 mm; Z= 110 mm
- Reference- and limit switch on all axes
- Double safety emergency stop button
- Energy chain for clean cabling
- Total dinemsions incl motors: L x W x H = appr. 1750 x 1040 x 500mm
- Milling Motor anchorage: Euroneck Ø43mm
- incl. Software PC-NC or WIN PCNC Light
- incl. Software ConstruCAM-3D limited ( recommended sell price 1902.81 EUR)
To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward - complete machine includes 4 driver micro step controller, 4x 3,5 Amps
- Modular frame for universal application
- Weight appr. 82 kg
- An approx. 30-minute long introduction during pick up and an unlimted telephone support via Team Viewer Software are also includet.
- An approx. 1 1/2 hours long introduction and an installation of software on your brought note book/ PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.
Technical data of includet microstep controller:
- 4-channel control Power up to 4 x 3,5 AmpsMicro pacing 1/10- Micro-Step / 2000 steps / rev.
- 4 ports for 4 stepper motors
- Connection to parallel port or in USB WIN PCNC Economy to USB port
- "Sleep function" for power reduction in standby
- Protect against high voltage spikes
- LED control light for most important functions
- E-stop button, 2-way secured
- Control of 2 power-consumers up to 1200 watts via software switchable (from WIN PCNC Economy), 230 V, 8A ( 110 Volt controller also available )
- Power Supply Relay / Cooling
- Aluminum heatsink / 2 active fans 60 & 40mm
- Ability to connect a total of 5 end-and reference switches / stop button
- Connection ports of motors and control line through D-sub 9-pin.
More information, several videos about the applicability of the machine and customer implementations can be found here.
Use this cnc router as an plasma cutter ! Info here
The name High-Z derives from the fact, that the machines lower construction allows to work on pieces with unlimited height.
Take advantage of the High-Z 3D cnc-router as a plasma cutting machine for plasma cutting of steel, etc. Infos here !!!
Software Process:
You simply need to draw, control the tool path and finally move the machine with the generated G-codes.
Usable software:
-ConstruCAM-3D - WIN PCNC- Mach2/Mach 3 -
-DeskProto - FilouNC - WIN PCNC- and much other variants
Pictures of High-Z CNC milling machine / portal mill for download:
